Greenhouse Profile Production Line

Racking Shelf Production Line

We design and produce complete greenhouse profile production lines, to produce all metal parts of greenhouses. Our greenhouse profile production lines are capable to produce the H Profiles, C Profiles and Square Profiles. The line starts directly from the coil material and the end product is ready to use profiles for different purposes. The line is suitable for the production of stainless steel profiles, galvanized profiles and aluminum profiles.

Greenhouse profile production equipment can work with different coil weights starting from 1,5 ton up to 6 tons. The profile thickness is usually between 1-3 mm. The line is suitable for the production of greenhouse profiles and gutters with 100-600 mm width.

Greenhouse Profile Production Line is consisting of the following equipment:

Roll Forming Process

The main part of the greenhouse profile production line is rollforming process. The line starts with the loading of the new coil onto the decoiler machine. Coil loading car or coil loading device is loading the coil onto the decoiler and Decoiler starts the uncoiling of the coil. At the next stages, straightener machine is straightening the material and servo feeder machine feeds the material to the eccentric press. The press is punching the holes on the profiles and sending the material to the rollforming machine.

Further, the material is fed to the rollforming machine for the final forming. Rollforming machine makes the C, U, L, H or square profiles from the sheet material using different rollers. There is flying shear at the end of the rollforming machine to cut the profile at a requred length. The last operation is the stacking unit, which stacks the ready profiles properly.

Greenhouse Profile Types

Our greenhouse profile rollforming lines are suitable to produce different profiles of solar panels. Most popular profiles of our lines are:

Any types of holes and embossings are possible on the surfaces of the profiles. The width of the profiles can vary and the rollfroming machine is adjustable for different widths. The length of the profiles are also various and flying shear can cut at any length without stopping the process.

Adjustment of the Line

Our greenhouse manufacturing line is adjustable to produce the greenhouse profiles and gutters with various sizes. Usually the greenhouse profiles are in L, C, U, H or square shapes with 1,5 mm thickness. One line can produce the profiles with different length. The adjustment is possible on the control screen. The operator just selects the required length and the flying shear cuts at that dimension. The adjustment of the line from one to to another one takes only 10 seconds.

Control of the Line

We use a special Schneider Software to control the line completely. The operator gives the commands from the operator panel to start the operation. Is is enough to input the coil features and the sizes. The line becomes ready to start the process with the given specifications. All process is automatic and no any human intervention is needed.
Scroll to Top