Cut to Length Line

Cut to Length Line

We design and produce complete cut to length lines, according to the requirement of our customers. Cut to Length Line is used to get blanks from the coils directly. It is possible to cut the coil in any required length, up to 6 meter length maximum.

Cut to Length Line can work with different coil weights starting from 4 ton up to 20 tons. Material thickness can be maximum 6 mm and the coil width can be between 300 mm up to 1600 mm.

Cut to Length Line is consisting of the following equipment:

  • Coil Decoiler or Uncoiler machine
  • Coil Loading Device
  • Straightening Machine
  • Servo Feeder
  • Guillotine Shear
  • Stacking Unit.

Cut to Length Process

Cut to Length Line process starts with the loading of the new coil onto the decoiler machine. Coil loading car or coil loading device is loading the coil onto the decoiler and Decoiler starts the uncoiling of the coil. At the next stages, straightener machine is straightening the material and servo feeder machine feeds the material to the guillotine. Guillotine is cutting the sheet material in any speed to get a required length. The last operation is the stacking unit, which stacks the cut blanks properly.

Coil Sizes

Coil thickness can be as less as 0,5 mm up to 6 mm maximum. For aluminum and light steel material, higher thicknesses are also possible.

The width of the coil starts from 30 mm and goes up to 1600 mm.

Coil inner diamater can be different according to customer requirement. We produce decoilers for the coils with inner diamater of 300-550 mm, 350-550 mm, 400-550 mm and 450-550 mm.

Outer diameter of the coil is maximum 1600 mm. For the higher outer diameters a different system can be designed.

The length of output material can be adjusted up to 6 meter.

Combined Coil Slitting & Cut to Length Line

We suplly an universal lines – which is the combination of the cut to length line and coil slitting line. The line is capable to make both operations, according to customer needs.

Before beginning the operation, the operator is selecting the process and the line is performing only that operation. During the cut to length line process, after the feeder machine, guillotine is cutting the coil and the stacking unit is stacking them. During the coil slitting process, after the feeder machine, guillotine becomes passive and the coil contunues to the slitting heads. After the slitting process the separator machine is separating the coil strips. At the end of the line, recoiling machine is creating new coils with smalled widths.

Control of the Line

We use a special Schneider Software to control the line completely. The operator gives the commands from the operator panel to start the operation. Is is enough to input the coil features and the sizes. The line becomes ready to start the process with the given specifications. All process is automatic and no any human intervention is needed.

Scroll to Top