Content-Type: text/html; charset=UTF-8
Content-Transfer-Encoding: 8bit
Coilmak "Collaboration"
From: Pablo Carrera gerencia@cmainpro.com
Subject: Collaboration
Message Body:
Dear Coilmak Team,
I hope you are doing well.
My name is Pablo Carrera, and I would like to introduce CMAINPRO, a company specialized in the supply and representation of industrial machinery for metal fabrication, steel processing, cutting and forming technologies across Ecuador, Colombia and Latin America.
At CMAINPRO, we work closely with several international manufacturers and maintain strong relationships with key companies in the steel fabrication and metal processing industries. Our team has solid experience in cutting technologies, coil processing, leveling, slitting, and metal forming solutions, supporting customers from technical definition through installation and commissioning.
Currently, we are evaluating two important projects in Ecuador, and we would appreciate receiving your technical and commercial quotation under CIF Guayaquil Port – Ecuador conditions.
Below are the preliminary technical requirements:
1. FORMING / SLITTER LINE
Processable Materials
Cold rolled and galvanized steel: 0.4 – 3.0 mm
Stainless steel: 0.4 – 1.5 mm
Main Technical Requirements
Maximum coil width: 1,220 mm
Decoiler: 22–25 tons, with stepped cones and entry from both sides
Double stacking / blanking system allowing continuous production without stops
Cutting system: Flying shear / cut-to-length
Maximum line speed: Up to 80 m/min
Discharge pallets: Double pallet 1,400 x 3,000 mm (x2)
Slitting head:
Thickness range: 0.4 – 1.4 mm
Up to 5 simultaneous cuts
Edge trimming system:
Side knives
Automatic scrap winders
Leveling and flattening:
22 high precision rollers
2. DOUBLE HEAD LEVELING LINE
Thickness Range
Head 1:
1.5 – 6 mm
Head 2:
6 – 12 mm
Material
Structural steel ASTM A572 Gr.50
Main Requirements
Working width: 1,800 mm
Decoiler: 25 tons
Accumulator:
Capacity for three coils
Continuous operation capability
Cutting system: Flying shear
Working speed: 30 – 40 m/min
Inline Stacker
1,800 x 6,000 mm (x2)
Second stacker to allow special lengths without affecting standar
—
This is a notification that a contact form was submitted on your website (Coilmak https://coilmak.com).